• NO.: WAM-200B / WAM-220B
  • Views : 900

1、The whole machine is made according to reliable, saving energy and safety. It is facility to operate and change order rapidly.
2、Adopting high-grade material and fittings.
3、The transmission gear adopts the high-quality steel, which is grinded after heat-treatment. It can reach six grade precision.
4、Adopting spline-free shaft collar to reduce wearing out and keep long time overprinting precision.
5、All of the rollers are plated with rigid chrome to increase hardness.
6、Adopting oil pump automatic lubrication system to keep lifetime of the parts in the machine.
7、Feeding can continue or skip, counter can record the board quantity accurately.
8、Adopting PLC and touch screen multifunction controlling.
9、Installing zero position return, printing position memory during wiping and auto restoration are available, reducing the time for adjustment.
10、Automatic to zero and reset.
  WAM-200B WAM-220B
Max. Feeding Size(W×L) (mm) 820×2000 1050×2200
Min. Feeding Size(W×L) (mm) 220×485 250×500
Max. Printing Size(W×L) (mm) 800×1800 1050×2000
Plate Thickness(mm) 7.2 7.2
Board Thickness(mm) 3-9 3-9
Max. Machine Speed(pcs/min) 200 200
Feeding Precision (mm) ±0.5 ±0.5
Overprinting Precision (mm) ±0.5 ±0.5
Slotter Precision (mm) ±1 ±1
Diecutter Precision(mm) ±1 ±1

1、 Electric controlling the movement of the machine and installed alarms in order to assure the safety of the operating personnel while the bell rings constantly during marching.
2、 Moving shaft installs friction clutch to avoid of damaging the machine by error action.
3、 Pneumatic interlocking mechanism.
4、 It has protective device when main motor starts. If the machine has not been locked, the main motor can not start. The main motor uses frequency motor to save energy.
5、 It is the back-kicking type feeding adopting wind-absorbing auxiliary. According to the bending of board, it can adjust the capacity of winding in order to insure the smooth board supplying.
6、 Feeding slide adopts engineering plastics, low friction force between slide and the paper, so it can transport the paper smoothly.
7、 Raise-paper jaw adopts cylinder to act rapidity. It also has controller switch at the panel of slotter, can stop feeding.
8、 Aluminum alloy material kicking-board is light and antifriction.
9、Installed dusting negative pressure device, good-quality import brushes, can clean the matter on the paper surface and increase the printing quality.
10、The upper paper-feeding roller is wrapped with antifriction rubber and the lower paper-feeding roller is empaistic and chromeplated, all of rollers do balance alignment.
11、The space of the paper-sending roller is adjusted by hand. The scale panel shows the adjusted data.
12、Electrical automatic to zero in feeding.
13、It has skip feeding device, the counter can accurately record the quantity of production.
14、The functions on the control panel are clearly and centralized easy for operation.
15、Installed automatic to zero position device, the position can be correctly adjusted by means of trial printing two pieces of cartons, thus reduces the waste of cartons.
16、Automatic adjust the side-board and back-board is optional.
17、Automatic flap device is optional.
18、Optional Sevo-controller feeding system. It can increase the precision of feeding with rubber-wheel and absorbing fan.

1、 Printing rollers use good-quality heavy-walled seamless steel pipe, grind the surface and do the hard chrome plating.
2、 All of the rollers are corrected by dynamic balance, so the revolving is steady.
3、 Applies hanging plate printing system, easy for plate changing; and has pedal switch, easy for plate hanging.
4、 The surface of printing roller is to grind and do the hard chrome. The space of printing roller is adjusted by hand; the scale panel shows the data.
5、 It has anilox roller plus paper feeding system auto lifting device (In feeding anilox roller drops and contacts printing plate; it rises to separate from the printing plate when stop feeding).
6、 Phase-adjusting mechanism, planet-gear structure.
7、 Adopting PLC to control the printing phase by the way of electric display adjusting at will.(adjustment when running and stopping is OK)
8、 Adopting electromagnetic clutch braking mechanism, while the machine separates or the phase is adjusting; the brakes can restrict the revolving of the machine and keep the point of original gears’ position.
9、Quickly cleaning the ink device, it memory the reset position after cleaning plate.
10、The rubber roller is formed by means of wrapping a steel pipe with wearable rubber, and has good ink transfer effect.
11、The transverse position of printing roller can be adjusted by hand, with total distance adjustable from right to left being 10 mm.
12、The surface of steel anilox roller is to grind, make the reticulate pattern, then do the hard chrome. The screen ruling is optional according to the user’s necessity.
13、Adopting rubber roller inking system, soaking-ink mouth has strainer, also has stainless steel ink-chamfer.
14、Ceramic anilox roller is optional according to the user’s necessity.


1、 Creasing-wheels cover nice glue, can not damage paper.
2、 The space of the creasing-wheel can be adjusted by hand. The scale panel shows the adjusted data.
3、 Slotter knife drum, creasing-wheel, paper-feeding wheel are adjusted together in transverse.
4、 Adopting planet-gear structure phase adjustment.
5、 Adopting PLC and touch screen to control the slotter phase, converter adjustment.
6、 Four knives which adjusting the height of the carton are adjusted synchronously.
7、 Humanization operating interface and color touch screen, it can control feeding, printing and slotter, easy to operate.
8、 It can storage the orders.

1、 Cushion roll adopts high-quality steel, grind the surface and do the hard chrome plating.
2、 All of the rollers are corrected by dynamic balance, so the revolving is steady.
3、 Cushion roll movement from left to right is 40 mm with mechanism.
4、 Phase-adjusting mechanism, planet-gear structure.
5、 The transverse position of cushion roller can be adjusted by hand, with total distance adjustable from right to left being 10 mm.
6、 The cushion roller will rise to avoid damage when stop feeding, so it can increase the lifetime.
7、 Speed-different compensate device can control the surface speed of the cushion roll.
8、 Adopting coder to control the die-cutting phase by the way of button and screen display adjusting at will.
9、 Automatic lathe the cushion to reduce the pressure of die-cutter.

1、The machine adopts PLC programs controlling.
2、Converter velocity modulation.
3、Order prearrangement.
4、Accident display, easy for checking the accident.
5、Adopting import electricity element.


Key words :